Brand - FAB

ABOUT THE PRODUCT:

Alkyd binder based high quality decorative matte paint

FEATURES:

Quick drying, coverage, easy brushing, non-yellowing are its superior features

APPLICATION:

It is used in the interior of buildings, painting of wooden, wall, metal surfaces for decorative purposes, printing, serigraphy, painting and drawing. After cleaning the surfaces to be applied from any dirt, rust and oil, metal surfaces should be primed with FAB SYNTHETIC ANTIPAS (140). FAB MOBITEX WOODEN GUARD (182) against new wooden surfaces to be applied, wooden worms that may appear, and FAB BINDER (340) must be applied to new or putty walls. FAB SYNTHETIC MAT (120) 1 liter of dye is dissolved in approximately 100-150 ml of FAB SYNTHETIC TINER (160) until homogeneous. Can be applied with a brush, roller or pistol. It should be applied in two coats. Wait 1 day for the second coat to apply. Immediately after use, the tools should be cleaned with FAB SYNTHETIC TINER (160).

INVESTIGATION:

The product should be diluted with 10-15% FAB SYNTHETIC TINER (160)

DRYING TIME:

25 ° C / 65% HR: Tactile drying: 1-2 hours, powder drying: 3-4 hours, hard drying: 24 hours

INTELLIGENCE RATE:

36 ° C.

COST:

1 liter of FAB SYNTHETIC MAT (120) can be used to paint an area of ​​12-14 m² (25 ± 5µm dry layer thickness) depending on the surface in a single layer. Sample studies should be performed for more accurate consumption control

NOTE:

The temperature of the surfaces to be applied should be between + 5 ° C and 30 ° C.