Brand - FAB

ABOUT THE PRODUCT:

It is a nitrocellulose-based, air-drying, matte finish.

FEATURES:

It dries quickly and does not change the color of the board.

APPLICATION:

It is used for protective and decorative purposes on all types of primed wooden surfaces. Creates a matte & smooth surface Can be easily applied on cellulosic, polyurethane systems. FAB CELLULOZIC MAT LACK (156) It is important to use FAB CELLULOZIC FILLED VERNIC (157) to obtain a smooth surface after lightly rubbing on the wooden surfaces to be applied. After repeated light rubbing, FAB CELLULOZIC MAT LACK (156) is dissolved in a 1: 1 ratio with FAB CELLULOZIC TINER (161) until homogeneous, and 2-3 times with a pistol 20-30 minutes apart. Immediately after use, the instruments should be cleaned with FAB CELLULOSIC TINER (161).

INVESTIGATION:

Dilute with FAB CELLULOSIC TINER (161) in a 1: 1 ratio.

DRYING TIME:

25 ° C / 65% relative humidity: 5-7 minutes for first drying. Tactile drying: 20 minutes.

INTELLIGENCE RATE:

<23 c="" p="">

COST:

If applied in a single layer in such a way as to create a dry layer of 30-35 microns, an area of ​​10-12 m² is painted with 1 liter of FAB CELLULOZIC MAT LACK (156).