BEST TUTKAL is an adhesive with polyvinyl acetate composition, which is used for bonding all Növ taxta products. It is kept in sight for use in the tax industry and in the industry. No traces are left on the taxta products at the time of istifada. Although it has high adhesion ability, it shows high elasticity at the adhesion point.
Benefits of use:
The part that will be worked should be washed, cleaned of oil and dirt. Unbreaded dough can reduce its sticking time and reduce its tenacity. Before it is used, the temperature of the adhesive should be between 20-40. It should be angered otherwise. BEST GLUE is rubbed on the face once. When you need a sharpener, it is necessary to do this twice, as long as the first layer is dry.
After using the adhesive, it is necessary to sigh for 3 minutes: at this time, the adhesive is solid, the adhesive should still fall off. However, after that, it is to combine the shares. After combining the shares, it is necessary to rub them against each other for a few seconds and hold them tightly for a few hours. When it is pasted again, it is old on the old sticky residue, and after it becomes damp, it is necessary to clean it.
The moisture of the tax to be pasted should not be 20% more. Otherwise, the stickiness drops down. BEST GLUE is transparent after drying. It can be used between +5 C and +50 C temperature.
Sharpening:
25 kg / 10 kg / 3.5 kg / 1 kg
Storage conditions:
It can be stored for 3 years in the original sealed containers, in an undiluted condition that is not under 0°C or above +50°C, where there is no sunlight alone.
Non-hazardous Conditions:
Keep the children's hands and fork off the ground.